seriesonedr timer ? 6 amp ac and dc rated output ? compact size (11mm wide) ? dual scr or mosfet output ? ac/dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) ac output ? timer status led indicator ? ul listed, hp rated ? 8 industry standard functions (a/at, b, c, d/di, h/ht, l/li, ac and bw) product selection control voltage ac output dc output 12-24 vac/dc drtx24d06x DRTX06D06 90-140 vac/dc drtx24b06x 180-280 vac/dc drtx24a06x available options output specifications (1) description drtx24 drtx06 operating voltage 24-280 vac (47-440hz) 1-48 vdc transient overvoltage [vpk] @ 25c 600 60 vdc rated load current (2) 6 arms 6 a rated load current {ul508 motor controller} (2) [arms] 3.6 arms na minimum load current 150 marms 100 ma maximum off-state leakage current @ rated voltage 0.1 marms 20 a minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 na maximum surge current (ac out put 1 cycle. dc output 10ms) 285/300 apk (50/60hz) 60 a maximum i2t for fusing [a2 sec] 410/375 (50/60hz) na maximum on-state voltage drop @ rated current [vpk] 1.3 0.3 vdc maximum on-state resi stance (rds-on) [ohms] na 0.034 hp rating ul 508/iec60947[hp (kw)]: 240 vac 1/3 (0.24) na iec 62314 lc-a [fla] 6 a na iec 62314 lc-b [kw] 1.44 na wire size min/max (solid /stranded) [awg/ iec mm2] (4) 22/12 [0.33/3.31] 22/12 [0.33/3.31] output terminal screw torque [in lb (nm)] 7.0 (0.8) 7.0 (0.8)
input specifications (1) description drtxxxd06 drtx24a06 drtx24b06 control voltage range 12-24 vac/dc 180-280 vac/dc 90-140 vac/dc must turn-off voltage 1 vac/dc 20 vac/dc 10 vac/dc min input current @ min voltage (ac/dc) (for on-state) 7.6/6.3 ma (5) 7.2/7.1 ma 7.6/7.4 ma maximum input current @ maximum voltage 12.1/9.1 ma (6) 9.7/9.6 ma 12.5/12.3 ma nominal input impedance 2k (7) 25k 12k wire size min-max (solid/stranded) [awg/ iec mm2] (4) 22-16 / 0.33-1.31 22-16 / 0.33-1.31 22-16 / 0.33-1.31 led status indicator (color) yes (green) yes (green) yes (green) input terminal screw torque [in lb (nm)] 4.4 (0.5) 4.4 (0.5) 4.4 (0.5) maximum turn-on/off time see note 9 see note 9 see note 9 general specifications description parameters dielectric strength, input/output/base (50/60hz) 3750 vrms (8) minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 10 pf ambient operating temperature range -30 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 1.76 oz (50 g) housing material ul 94 v0 self-extinguishing terminal finish sulfamate nickel humidity 5 - 85% non condensing rohs exemption #?s 5(a), 7(a), 7(c)-i agency approval ul 508 listed, e116949 general notes general notes 1) all parameters at 40c and per section unless otherwise specified. 2) see derating curves. 3) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 4) for ul listing, must use wire rated @ 75c 5) for dc output model minimum current spec is 15.7/12.4ma (ac/dc). 6) for dc output model maximum current spec is 27.9/20.3ma (ac/dc). 7) for dc output model, spec is 1k. 8) for dc output model, spec is 2500v 9) activation time = 65 ms / deactivation time = 100 ms
wiring diagram mechanical specifications
thermal derate information agency approvals designed in accordance with the requirements of iec 62314 iec 60068-2-6 : vibration 0.35mm and 0.75mm amplitutde over 10-55 hz iec 60068-2-27 : shock 15g/11ms iec 61000-4-2 : electrostatic discharge level 3 iec 61000-4-4 : electrically fast transients level 3 iec 61000-4-5 : electrical surges level 3 e116949 rev. 120712
led status function table
annex - enviromental information
|